1 Insert + 3 Blanks
$36.99
Includes one assembled 1U rack panel, one loose carrier/insert of your choice, and three loose blank filler panels.
The selected insert and all three blanks ship loose. They are not pre-installed in the rack panel.
MODULAR RACK HARDWARE
1U Raspberry Pi & Repeater Rack Mount System
A configurable 1U 19-inch rack panel for Raspberry Pi, AllStar, repeater controller, MMDVM, amateur radio, and communications projects. Build the four-position panel around the carriers, accessory plates, and blank fillers your installation actually requires.
CONFIGURABLE FRONT-PANEL SYSTEM
A modular 19-inch rack panel for radio and repeater projects.
The system is designed around interchangeable modules rather than a closed enclosure. The rack panel provides four positions; each position can be configured with a Raspberry Pi carrier, MMDVM/display insert, or blank filler depending on the project.
This is an open front rack-panel system, not a full rack enclosure.
Current carrier options
- Raspberry Pi 3 / Pi 5 carrier
- Raspberry Pi 4 carrier
Verified insert options
- Simplex MMDVM panel
- Blank filler panel
CONFIGURATIONS & PRICING
Choose the loose inserts you want included.
Custom 4-Insert Bundle
$46.99
Includes one assembled 1U rack panel plus four loose verified carriers/inserts in any combination you choose.
These are four included loose pieces, not installed positions. Arrange them however you like after receiving the rack.
Electronics shown in example photos are not included. Additional insert designs will be added only after physical fitment is verified.
Your selected loose inserts are saved with the cart and passed into Stripe with the order so we know exactly what to pack.
Designed as a Raspberry Pi rack mount, repeater rack panel, AllStar rack panel, and general radio communications rack solution for compact 1U installations.
INSERT OPTIONS
Configure the front panel.
Modular insert plates
Interchangeable plates let the rack panel support radio-project hardware while keeping the front of the rack organized and serviceable.
Prototype assortment shown. Only the verified choices listed above are currently offered.
Blank filler
Close unused positions cleanly while leaving room to expand the system later.
INDIVIDUAL INSERTS & CARRIERS
Add replacements or expand your rack later.
Already have the rack panel? Order individual loose carriers and filler panels separately. These parts ship loose and can be moved between any compatible opening in the modular rack panel.
Raspberry Pi 3 / Pi 5 Carrier
$12.99
One loose carrier for Raspberry Pi 3 or Raspberry Pi 5 hardware.
Raspberry Pi 4 Carrier
$12.99
One loose carrier designed for Raspberry Pi 4 hardware.
Simplex MMDVM Panel
$8.99
One loose front insert for the verified simplex MMDVM configuration.
Blank Filler Panel
$6.99
One loose blank filler for closing an unused rack-panel opening.
Individual rack parts use the standard $13.95 order-level shipping rate when purchased without a rack-panel bundle. If a rack bundle is also in the cart, the rack-order shipping rate of $14.95 applies once to the complete order.
PI CARRIERS
Open carriers for Raspberry Pi hardware.
The carrier is intentionally open rather than boxed in, keeping the Pi accessible for cabling, service, and cooling while presenting its connections through the rack face.
BUILD IT YOUR WAY
Designed for practical radio projects.
MMDVM Nodes
Rack-mount Pi and MMDVM hardware with display and antenna options arranged at the front.
Repeater Controllers
Keep Pi-based control hardware organized in an accessible rack format.
Custom Builds
Mix carriers, display plates and fillers to suit a specific communications project.
ORDERING
sales@customcomms.net →Need a particular panel combination?
Tell us which Raspberry Pi, MMDVM and display hardware you plan to use and we can help identify the matching panel configuration.